Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 250°C/2.16kg | ASTMD1238 | 5.3 | g/10min |
Melt Volume flow Rate | 260°C/5.0kg | ASTMD1505 | 18.0 | cm3/10min |
Modeling Shrinkage | MD:3.20mm,InjectionMolded | ASTMD955 | 0.50to0.80 | % |
Moisture Absorption | Saturation | ISO622 | 0.15 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO527-22 | 2200 | Mpa |
Tensile Strength | Yield,3.20mm,Injection | ASTMD638 | 56.9 | Mpa |
Tensile Stress | Yield | ISO527-22 | 60.0 | Mpa |
Tensile Strain | Yield | ISO527-22 | 4.9 | % |
Tensile Strain | Break,3.20mm,InjectionMolded | ASTMD638 | >100 | % |
Nominalstrainatbreak | | ISO527-22 | >50 | % |
Flexural Modulus | 3.20mm,InjectionMolded | ASTMD790 | 2110 | Mpa |
Flexural Strength | 3.20mm | ASTMD790 | 77.5 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
RTIStr | 1.6mm | UL746 | 60.0 | °C |
RTIStr | 3.0mm | UL746 | 60.0 | °C |
Heat Deflection Temperature | 1.8MPa,Unannealed,6.40mm,InjectionMolded | ASTMD648 | 113 | °C |
Heat Deflection Temperature | 1.8MPa | ISO75-22 | 104 | °C |
Glass Transition Temperature | | ISO11357-22 | 150 | °C |
Vicat Softening Temperature | 50N | ISO3062 | 119 | °C |
Coefficient of Linear Thermal Expansion | MD | ISO11359-22 | 7.7E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD | ISO11359-22 | 8.3E-05 | cm/cm/°C |
RTIElec | 1.6mm | UL746 | 60.0 | °C |
RTIElec | 3.0mm | UL746 | 60.0 | °C |
RTIImp | 1.6mm | UL746 | 60.0 | °C |
RTIImp | 3.0mm | UL746 | 60.0 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
High Amp Arc Ignition | 1.6mm | UL746 | PLC1 | |
High Amp Arc Ignition | 3.0mm | UL746 | PLC1 | |
High Amp Arc Ignition | PLC | UL746 | PLC6 | |
Hot-wire Ignition | 1.6mm | UL746 | PLC3 | |
Hot-wire Ignition | 3.0mm | UL746 | PLC3 | |
Surface Resistivity | | IEC600932 | 3.8E+14 | ohms |
Volume Resistivity | | IEC600932 | >1.0E+13 | ohms·m |
Electric strength | | IEC60243-12 | 42 | KV/mm |
Relative Permittivity | 1MHz | ASTM D1646 | 2.80 | |
Dissipation Factor | 1MHz | ASTM D1646 | 0.010 | |
Arc Resistance | | ASTMD495 | PLC6 | |
Comparative Tracking Index | CTI | UL746 | PLC0 | |
Comparative Tracking Index | | ISO 2577 | 200 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpynotchedimpactstrength | 23°C | ISO179/1eA2 | NoBreak | |
Charpy impact strength | 23°C | ISO179/1eU2 | NoBreak | |
Charpy Notched Impact Strength | -30°C | ISO179/1eU2 | NoBreak | |
Hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | R-Scale | ASTMD785 | 114 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.6mm | UL94 | HB | |
Flame Rating | 3.0mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.