Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | 3.2mm(0.125in) | ASTM D-955 | 0.002-0.006 | in/in |
| Density / Specific Gravity | | ASTM D-792 | 1.2 | g/cm |
| Haze | | ASTM D-1003 | 0.3 | % |
| Transmittance | | ASTM D-1003 | 91 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Stress (Break) | | ASTM D-638 | 6900/7400 | psi |
| Tensile Elongation (Break) | | ASTM D-638 | 5/300 | % |
| Notched Izod Impact Strength | 23℃/-40℃ | ASTM D-256 | 1.5/0.7 | ft-lb/in |
| Rockwell Hardness | | ASTM D-785 | 103 | R |
| Flexural Modulus | | ASTM D-790 | 2.9×105 | psi |
| Tensile Strength (Yield) | | ASTM D-790 | 10000 | psi |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Heat Deflection Temperature | 0.45MPa(66PSi) | ASTM D-648 | 75 | °C |
| Vicat Softening Temperature | 1kg负荷 | ASTM D-1525 | 85 | °C |
| Flammability | | UL 94 | V-2 | |
| Heat Deflection Temperature | 1.82MPa(264PSi) | ASTM D-648 | 65 | °C |
| Other Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Solid Content | | | 0.72 | |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Mass-Flow Rate | 230℃,5kg | | 15 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
