ASA Luran®S 776S BK BASF GERMANY

Unit Price:
$3200 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
176MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Density / Specific Gravity		ISO1183	1.07	g/cm³
Apparent Density			0.59	g/cm³
Melt Volume flow Rate	220°C/10.0kg	ISO1133	4.00	cm3/10min
Modeling Shrinkage		ISO294-4	0.50到0.90	%
Moisture Absorption	Saturation,23°C	ISO62	1.7	%
Moisture Absorption	Moisture Absorption	Equilibrium,23°C,50%RH	ISO62	0.35	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Modulus		ISO527-2	2200	Mpa
Tensile Stress	Yield,23°C	ISO527-2	47.0	Mpa
Tensile Strain	Yield,23°C	ISO527-2	3.3	%
Tensile Creep Modulus	1hr	ISO899-1	2000	Mpa
Tensile Creep Modulus	Tensile Creep Modulus	1000hr	ISO899-1	1200	Mpa
Flexural Stress		ISO178	65.0	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Heat Deflection Temperature	0.45MPa,Annealed	ISO75-2/B	101	°C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,Annealed	ISO75-2/A	96.0	°C
Vicat Softening Temperature	--	ISO306/A50	104	°C
Vicat Softening Temperature	Vicat Softening Temperature	--	ISO306/B50	92.0	°C
Coefficient of Linear Thermal Expansion	MD	ISO11359-2	8.0E-5到1.1E-4	cm/cm/°C
Thermal Conductivity		DIN52612	0.17	W/m/K

Electrical Properties	Test Condition	Test Method	Test Result	Unit
Surface Resistivity		IEC60093	1E+13	ohms
Volume Resistivity		IEC60093	1E+14	ohms·cm
Dielectric Constant	100Hz	IEC60250	3.80
Dissipation Factor	100Hz	IEC60250	9E-03
Dissipation Factor	Dissipation Factor	1MHz	IEC60250	0.034

Films Properties	Test Condition	Test Method	Test Result	Unit
Tensile Elongation(MD)	Break	ISO527-3	12	%

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Notched Impact Strength	-30°C	ISO179	4.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO179	30	kJ/m²
Notched Izod Impact Strength	-30°C	ISO180/A	4.0	kJ/m²
Notched Izod Impact Strength	Notched Izod Impact Strength	23°C	ISO180/A	15	kJ/m²

Hardness	Test Condition	Test Method	Test Result	Unit
Ball Indentation Hardness		ISO2039-1	70.0	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.