PEI ULTEM™ 1000-1100 SABIC INNOVATIVE US
45
- Unit Price:
- $16796 USD/MT
- Packaging Specification:
- 25KG/PKG
- Supply Quantity:
- 61.7MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Melt Mass-Flow Rate | 337°C/6.6 kg | ASTM D1238 | 9.0 | g/10 min |
Modeling Shrinkage - Flow | 3.20 mm | 内部方法 | 0.50 到 0.70 | % |
Moisture Absorption | 24 hr | ASTM D570 | 0.25 | % |
Equilibrium, 23°C | ASTM D570 | 1.3 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Tensile Modulus | ASTM D638 | 3580 | Mpa | |
Tensile Strength | Yield | ASTM D638 | 110 | Mpa |
Tensile Elongation | Yield | ASTM D638 | 7.0 | % |
Break | ASTM D638 | 60 | % | |
Flexural Modulus | 100 mm Span | ASTM D790 | 3510 | Mpa |
Flexural Strength | Yield, 100 mm Span | ASTM D790 | 165 | Mpa |
Poisson Ratio | ASTM E132 | 0.36 | ||
Taber Abrasion Resistance | 1000 Cycles, 1000 g, CS-17 Wheel | ASTM D1044 | 10.0 | mg |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Deflection Temperature Under Load | 0.45 MPa, Unannealed, 6.40 mm | ASTM D648 | 210 | °C |
1.8 MPa, Unannealed, 6.40 mm | ASTM D648 | 201 | °C | |
Vicat Softening Temperature | ASTM D15254 | 218 | °C | |
Coefficient of Linear Thermal Expansion | Flow : -20 to 150°C | ASTM E831 | 5.6E-5 | cm/cm/°C |
Across Flow : -20 to 150°C | ASTM E831 | 5.4E-5 | cm/cm/°C | |
Thermal Conductivity | ASTM C177 | 0.22 | W/m/K | |
RTI Elec | UL 746 | 170 | °C | |
RTI Imp | UL 746 | 170 | °C | |
RTI | UL 746 | 170 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Volume Resistivity | ASTM D257 | 1.0E+17 | ohms·cm | |
Dielectric Strength | 1.60 mm, in Air | ASTM D149 | 33 | KV/mm |
1.60 mm, in Oil | ASTM D149 | 28 | KV/mm | |
3.20 mm, in Oil | ASTM D149 | 20 | KV/mm | |
Dielectric Constant | 100 Hz | ASTM D150 | 3.15 | |
1 kHz | ASTM D150 | 3.15 | ||
Dissipation Factor | 100 Hz | ASTM D150 | 1.5E-3 | |
1 kHz | ASTM D150 | 1.2E-3 | ||
2.45 GHz | ASTM D150 | 2.5E-3 | ||
Arc Resistance | ASTM D495 | PLC 5 | ||
Comparative Tracking Index | UL 746 | PLC 4 | ||
High Amp Arc Ignition | UL 746 | PLC 3 | ||
High Voltage Arc Tracking Rate | UL 746 | PLC 2 | ||
Hot-wire Ignition | UL 746 | PLC 1 |
Injection | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Drying Temperature | 150 | °C | ||
Drying Time | 4.0 到 6.0 | hr | ||
Suggested Max Moisture | 0.020 | % | ||
Suggested Shot Size | 40 到 60 | % | ||
Rear Temperature | 330 到 400 | °C | ||
Middle Temperature | 340 到 400 | °C | ||
Front Temperature | 345 到 400 | °C | ||
Nozzle Temperature | 345 到 400 | °C | ||
Processing (Melt) Temp | 350 到 400 | °C | ||
Mold Temperature | 135 到 165 | °C | ||
Back Pressure | 0.300 到 0.700 | Mpa | ||
Screw Speed | 40 到 70 | rpm | ||
Vent Depth | 0.025 到 0.076 | mm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Unnotched Izod Impact Strength | 23°C | ASTM D4812 | 1300 | J/m |
Reverse Notch Izod Impact | 3.20 mm | ASTM D256 | 1300 | J/m |
Gardner Impact | 23°C | ASTM D3029 | 36.0 | J |
Hardness | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Rockwell Hardness | M-Scale | ASTM D785 | 109 |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Flame Rating | 0.40 mm | UL 94 | V-2 | |
0.75 mm | UL 94 | V-0 | ||
3.0 mm | UL 94 | 5VA | ||
Oxygen Index | ASTM D2863 | 47 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.