Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.98 | |
| Modeling Shrinkage | | ASTM D955 | 0.2 | % |
| Moisture Absorption 23℃/24H | | ASTM D570/ISO 62 | 0.01 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | | ASTM D638/ISO 527 | 130 | kg/cm²(MPa)[Lb/in²] |
| Rockwell Hardness | | ASTM D785 | 120 | |
| Flexural Modulus | | ASTM D790/ISO 178 | 183000 | kg/cm²(MPa)[Lb/in²] |
| Flexural Strength | | ASTM D790/ISO 178 | 190 | kg/cm²(MPa)[Lb/in²] |
| Tensile Elongation (Break) | | ASTM D638/ISO 527 | 1.1 | % |
| Charpy Impact Strength | | ASTM D256/ISO 179 | 4.5 | kg·cm/cm(J/M)ft·lb/in |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Burning Rate | | UL94 | V-0 | |
| Heat Deflection Temperature | | ASTM D648/ISO 75 | 260 | ℃（℉） |
| Heat Deflection Temperature | | ASTM D648/ISO 75 | 280 | ℃（℉） |
| Melting Temperature | | | 270 | ℃（℉） |
| Coefficient of Linear Thermal Expansion | | ASTM D696/ISO 11359 | 2 | mm/mm.℃ |
| Electrical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Constant | | ASTM D150/IEC 60250 | 5.8 | |
| Processing | Test Condition | Test Method | Test Result | Unit |
|---|
| Processing (Melt) Temp | | | 260-280 | °C |
| Processing (Melt) Temp | | | 290-310 | °C |
| Processing (Melt) Temp | | | 310-320 | °C |
| Processing (Melt) Temp | | | 280-300 | °C |
| Screw Speed | | | 40-100 | rpm |
| Mold Temperature | | | 130-150 | °C |
| Pressure | | | 40-50 | Mpa |
| Pressure | | | 0 | Mpa |
| Pressure | | | 80-130 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
