Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density / Specific Gravity | | g/cm | ISO 1183 | 1.2 |
Melt Mass-Flow Rate | | g/10min | ISO 1133 | |
Modeling Shrinkage | | % | ISO 294-4 | 0.65-0.7 |
Moisture Absorption | | % | ISO 62 | 0.12 |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | MPa | ISO 527-2 | 2400 |
Tensile Strength(Yield) | | MPa | ISO 527-2 | 66 |
Tensile Strength(Break) | | MPa | ISO 527-2 | |
Tensile Strain(Yield) | | % | ISO 527-2 | 6.1 |
Tensile Strain(Break) | | % | ISO 527-2 | |
Flexural Modulus | | MPa | ISO 178 | 2400 |
Flexural Strength | | MPa | ISO 178 | 73 |
Charpy Notched Impact Strength | 23℃ | KJ/m | ISO 179/1eA | 75 |
Notched Izod Impact Strength | 23℃ | KJ/m | ISO 180/1A | 85 |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | -,0.45Mpa | ℃ | ISO 75-2 | |
Heat Deflection Temperature | -,1.8Mpa | ℃ | ISO 75-2 | |
Vicat Softening Temperature | | ℃ | ISO 306 | |
Flame Rating | -,2.5mm | | UL94 | HB |
Flame Rating | -,3.00mm | | UL94 | HB |
Flame Rating | -,6.00mm | | UL94 | HB |
Flame Rating | -,0.75mm | | UL94 | V-2 |
Flame Rating | -,1.50mm | | UL94 | V-2 |
Flame Rating | -,2.4mm | | UL94 | V-2 |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | Ohm | IEC 60093 | |
Volume Resistivity | | Ohm.m | IEC 60093 | |
Relative Permittivity | -,100Hz | | IEC 60250 | 3.1 |
Relative Permittivity | -,1MHz | | IEC 60250 | |
Dielectric Strength | | kV/mm | IEC 60243-1 | 34 |
Other Properties | Test Condition | Test Method | Test Result | Unit |
---|
Oxygen Index | | % | ISO 4589-2 | 27 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.