Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | 23°C | ISO1183 | 1.10 | g/cm³ |
Spiral Flow | | 内部方法 | 80.0 | CM |
Modeling Shrinkage | TD | ISO294-4 | 2.2 | % |
Modeling Shrinkage | MD | ISO294-4 | 2.1 | % |
HumidityAbsorption- | 70°C | ISO1110 | 2.1 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | | ISO527-2/1 | 2700 | Mpa |
Tensile Stress | 屈服 | ISO527-2/50 | 63.0 | Mpa |
Flexural Stress | | ISO178 | 90.0 | Mpa |
Flexural Strain (Break) | | ISO178 | 7.5 | % |
Tensile Strain | 断裂 | ISO527-2/50 | >35 | % |
Flexural Modulus | | ISO178 | 2500 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 0.45MPa,未退火 | ISO75-2/B | 213 | °C |
Heat Deflection Temperature | 1.8MPa,未退火 | ISO75-2/A | 70.0 | °C |
Melting Temperature | | DINEN11357-1 | 262 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | 1E+14 | ohms |
Volume Resistivity | | IEC60093 | 1E+15 | ohms·cm |
Comparative Tracking Index | 解决方案A | IEC60112 | 600 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | -40°C | ISO180/1A | 12 | kJ/m² |
Notched Izod Impact Strength | -20°C | ISO180/1A | 12 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 15 | kJ/m² |
Charpy Notched Impact Strength | -30°C | ISO179/1eA | 10 | kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 17 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Burning Rate | 1.00mm | FMVSS302 | <100 | mm/min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.