Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Apparent Density | | ISO60 | 0.60 | g/cm³ |
Modeling Shrinkage | TD:280°C,2.00mm2 | ISO2577 | 0.61 | % |
Modeling Shrinkage | TD:120°C,4hr,2.00mm3 | ISO2577 | 0.15 | % |
Modeling Shrinkage | MD:280°C,2.00mm2 | ISO2577 | 0.59 | % |
Modeling Shrinkage | MD:120°C,4hr,2.00mm3 | ISO2577 | 0.14 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 7.0 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 2.0 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Modulus | 23°C | ISO527-2/1 | 4500 | Mpa |
Tensile Stress | Break,23°C | ISO527-2/5 | 85.0 | Mpa |
Tensile Strain | Break,23°C | ISO527-2/5 | 4.5 | % |
Flexural Modulus | 23°C | ISO178/A | 4000 | Mpa |
Flexural Stress | 3.5%Strain,23°C | ISO178/A | 125 | Mpa |
Flexural Stress | 23°C4 | ISO178/A | 130 | Mpa |
Flexural Strain | 23°C | ISO178/A | 5.0 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 8.0MPa,Unannealed | ISO75-2/C | 60.0 | °C |
Vicat Softening Temperature | -- | ISO306/B50 | 200 | °C |
Vicat Softening Temperature | -- | ISO306/B120 | 200 | °C |
Melting Temperature | | ISO11357-3 | 214 | °C |
Coefficient of Linear Thermal Expansion | MD:23to55°C | ISO11359-2 | 4E-05 | cm/cm/°C |
Coefficient of Linear Thermal Expansion | TD:23to55°C | ISO11359-2 | 1.5E-04 | cm/cm/°C |
Heat Deflection Temperature | 0.45MPa,Unannealed | ISO75-2/B | 205 | °C |
Heat Deflection Temperature | 1.8MPa,Unannealed | ISO75-2/A | 175 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | IEC60093 | 1E+15 | ohms |
Volume Resistivity | 23°C | IEC60093 | 1E+13 | ohms·cm |
Dielectric Strength | 23°C,1.00mm | IEC60243-1 | 43 | KV/mm |
Relative Permittivity | 23°C,100Hz | IEC60250 | 3.50 | |
Relative Permittivity | 23°C,1MHz | IEC60250 | 3.20 | |
Dissipation Factor | 23°C,100Hz | IEC60250 | 6E-03 | |
Dissipation Factor | 23°C,1MHz | IEC60250 | 0.015 | |
Comparative Tracking Index | SolutionA | IEC60112 | 600 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 80 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 70 | kJ/m² |
Multi-Axial Instrumented Impact Energy | -30°C | ISO6603-2 | 4.80 | J |
Multi-Axial Instrumented Impact Energy | 23°C | ISO6603-2 | 13.0 | J |
Multi-Axial Instrumented Impact Peak Force | -30°C | ISO6603-2 | 650 | N |
Multi-Axial Instrumented Impact Peak Force | 23°C | ISO6603-2 | 1000 | N |
Hardness | Test Condition | Test Method | Test Result | Unit |
---|
Ball Indentation Hardness | | ISO2039-1 | 110 | Mpa |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.6mm | UL94 | HB | |
Flame Rating | 3.2mm | UL94 | HB | |
Glow Wire Flammability Index | 2.0mm | IEC60695-2-12 | 650 | °C |
Oxygen Index | | ISO4589-2 | 22 | % |
BurningBehavior8 | | ISO3795 | passed | |
Additional | Test Condition | Test Method | Test Result | Unit |
---|
ISO Shortname | | ISO1874 | PA6/66HI,GR,14-040,GF15 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.