Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Taber Abrasion Resistance | | ASTM D-1044 | 10 | mg/1000次 |
Modeling Shrinkage | | ASTM D-955 | 5-7 | in/inE-3 |
Solid Content | | ASTM D-792 | 1.27 | |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | | ASTM D-785 | 109 | psi |
Tensile Strength (Yield) | | ASTM D-790 | 22000 | psi |
Unnotched Izod Impact Strength | | ASTM D-4812 | 25.0 | ft-lb/in |
Tensile Elongation (Yield) | | ASTM D-638 | 7.0 | % |
Tensile Strength (Yield) | | ASTM D-638 | 15200 | psi |
Notched Izod Impact Strength | | ASTM D-256 | 0.6 | ft-lb/in |
Flexural Modulus | | ASTM D-790 | 480000 | psi |
Tensile Elongation (Break) | | ASTM D-638 | 60.0 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Temperature Index | 机械冲击性能 | UL746B | 170 | °C |
Temperature Index | 非机械性能 | UL746B | 170 | °C |
Heat Deflection Temperature | 66Psi | ASTM D-648 | 405 | ℉ |
Coefficient of Linear Thermal Expansion | flow | ASTM E-831 | 3 | E-5/in/in℉ |
Coefficient of Linear Thermal Expansion | xflow | ASTM E-831 | - | E-5/in/in℉ |
Vicat Softening Temperature | | ASTM D-1525 | 426 | ℉ |
Heat Deflection Temperature | 264Psi | ASTM D-648 | 387 | ℉ |
Flammability | | UL 94 | V-0 | CLASS |
Temperature Index | 电性能 | UL746B | 170 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | ASTM D-257 | 1×10 | Ω.cm |
Dielectric Constant | | ASTM D-150 | 3.15 | |
Dissipation Factor | 1KHz | ASTM D-150 | 0.0013 | |
Dielectric Strength | 62mils | ASTM D-149 | 830 | v/mil |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 24hr,73℉ | ASTM D-570 | 0.250 | % |
Moisture Absorption | Equilibrium,73℉ | ASTM D-570 | 1.25 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.