Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density / Specific Gravity | | ISO1183 | 1.41 | g/cm³ |
| Melt Volume flow Rate | 190°C/2.16kg | ISO1133 | 8.00 | cm3/10min |
| Modeling Shrinkage | TD | ISO294-4 | 2.4 | % |
| Modeling Shrinkage | MD | ISO294-4 | 2.5 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | | ISO527-2/1A/1 | 2650 | Mpa |
| Tensile Stress | Yield | ISO527-2/1A/50 | 64.0 | Mpa |
| Tensile Strain | Yield | ISO527-2/1A/50 | 9.0 | % |
| Flexural Modulus | 23°C | ISO178 | 2450 | Mpa |
| Flexural Stress | 23°C | ISO178 | 77.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Heat Deflection Temperature | 0.45MPa,Unannealed | ISO75-2/B | 151 | °C |
| Heat Deflection Temperature | 1.8MPa,Unannealed | ISO75-2/A | 91.0 | °C |
| Melting Temperature | | ISO11357-3 | 167 | °C |
| Coefficient of Linear Thermal Expansion | MD | ISO11359-2 | 1.1E-04 | cm/cm/°C |
| Coefficient of Linear Thermal Expansion | TD | ISO11359-2 | 1.2E-04 | cm/cm/°C |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 4.0 | kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO179/1eA | 6.0 | kJ/m² |
| Notched Izod Impact Strength | 23°C | ISO180/1A | 6.0 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
