Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | 230°C/2.16kg | ASTMD1238 | 36 | g/10min |
Modeling Shrinkage | MD | ASTMD955 | 1.3 | % |
Moisture Absorption | Equilibrium,23°C,60%RH | ASTMD570 | 0.30 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Yield,23°C | ASTMD638 | 36.8 | Mpa |
Tensile Elongation | Yield,23°C | ASTMD638 | 620 | % |
Flexural Modulus | 23°C | ASTMD790 | 437 | Mpa |
Taber Abrasion Resistance | 1000Cycles,CS-17Wheel | ASTMD1044 | 7.00 | mg |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 0.45MPa,Unannealed | ASTMD648 | 120 | °C |
Brittleness Temperature | | ASTMD746 | <-70.0 | °C |
Peak Melting Temperature | | ASTMD3418 | 210 | °C |
Hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore D | ASTMD2240 | 63 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | UL94 | HB | |
Additional | Test Condition | Test Method | Test Result | Unit |
---|
Resilience | | | 43 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.