POM

POM Iupital™ FU2025 MITSUBISHI ENGINEERING JAPAN

364

Unit Price:US$ 5,670 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:wear resistant｜High mobility
Application Areas:Automotive sector｜Electronic and Electrical Applications
Color:--
Grade:Impact resistant grade

Material Certification

Technical Data Sheet

machinability	Test Condition	Test Method	Test Result
Dry conditions			热风干燥 80℃---约3-4小时
Processing temperature			170 °C
	Processing temperature			190 °C
		Processing temperature			180 °C
		Processing temperature	Processing temperature			180-210 °C
Screw speed			80-120 rpm
Mold temperature			≦40 °C

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638/ISO 527	1600 kg/cm²(MPa)[Lb/in²]
Bending modulus		ASTM D790/ISO 178	1400 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	48 kg/cm²(MPa)[Lb/in²]
Elongation at Break		ASTM D638/ISO 527	>100 %
tensile strength	23℃	ASTM D638	34.3 Mpa
Stretching length	23℃	ASTM D638	＞300 %
bending strength	23℃	ASTM D790	44.1 Mpa
Bending modulus	23℃	ASTM D790	1.38 GPa
Impact strength of cantilever beam gap	3.2mm	ASTM D256	180 J/m
Rockwell hardness		ASTM D785	75 M

thermal performance	Test Condition	Test Method	Test Result
Combustibility (rate)		UL 94	HB
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	1.2E-04 mm/mm.℃
UL flame retardant rating		UL 94	HB
Hot deformation temperature	455Kpa	ASTM D648	147 °C
Hot deformation temperature	Hot deformation temperature	820Kpa	ASTM D648	94 °C

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D792/ISO 1183	1.35
Shrinkage rate		ASTM D955	1.7 %
melt mass-flow rate		ASTM D1238	6.0 g/10min
Shrinkage rate	Flow		1.7 %

Electrical performance	Test Condition	Test Method	Test Result
Surface resistivity		ASTM D257	1×10
Volume resistivity		ASTM D257	1×10

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top

POM Iupital™ FU2025 MITSUBISHI ENGINEERING JAPAN

Material Description

Material Certification

Technical Data Sheet Compare

Technical Data Sheet