PA66

PA66 LNP™ LUBRICOMP™ RL-4530 SABIC INNOVATIVE US

230

Unit Price:US$ 3,577 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
20MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:High temperature resistance｜resist fatigue
Application Areas:Electronic and electrical accessories｜Automotive components｜Casters
Color:--
Grade:Injection grade

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Dart impact	--	ISO 6603-2	0.00 J
Dart impact	Dart impact	23°C, Energy at Peak	ASTM D3763	1.00 J
Suspended wall beam without notch impact strength	23°C6	ISO 180/1U	26 kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ASTM D4812	380 J/m

mechanical properties	Test Condition	Test Method	Test Result
Wear factor		ASTM D3702	2.0E+6 10^-8 mm³/N·m
Friction coefficient	Static	ASTM D3702	0.16
Bending modulus	50.0 mm Span3	ASTM D790	2260 Mpa
elongation	Break	ISO 527-2/5	4.7 %
	elongation	Break2	ASTM D638	4.7 %
		elongation	Yield	ISO 527-2/5	4.8 %
		elongation	elongation	Yield2	ASTM D638	4.6 %
tensile strength	Break	ISO 527-2/5	55.0 Mpa
	tensile strength	Break2	ASTM D638	49.0 Mpa
		tensile strength	Yield	ISO 527-2/5	55.0 Mpa
		tensile strength	tensile strength	Yield2	ASTM D638	52.0 Mpa
Friction coefficient	Dynamic	ASTM D3702	0.22
bending strength	Break, 50.0 mm Span	ASTM D790	73.0 Mpa
bending strength	bending strength	Yield, 50.0 mm Span	ASTM D790	73.0 Mpa
Bending modulus	--4	ISO 178	2580 Mpa
Tensile modulus	--	ISO 527-2/1	2960 Mpa
Tensile modulus	Tensile modulus	--1	ASTM D638	2690 Mpa

injection	Test Condition	Test Method	Test Result
Mold temperature			80 to 95 °C
Back pressure			0.200 to 0.300 Mpa
Screw speed			30 to 60 rpm
drying temperature			80 °C
drying time			4.0 hr
Suggested maximum moisture content			0.15 to 0.25 %
Temperature at the rear of the barrel			265 to 275 °C
Temperature in the middle of the barrel			280 to 295 °C
Temperature at the front of the material cylinder			295 to 305 °C
Processing (melt) temperature			275 to 290 °C

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	201 °C
	Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 64.0 mm Span6	ISO 75-2/Bf	221 °C
		Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	59.0 °C
		Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span6	ISO 75-2/Af	66.0 °C
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	9.0E-5 cm/cm/°C
	Linear coefficient of thermal expansion	Flow : -40 to 40°C	ISO 11359-2	9.1E-5 cm/cm/°C
		Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	9.5E-5 cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : -40°C	ISO 11359-2	9.6E-5 cm/cm/°C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.97 %
Water absorption rate	Water absorption rate	24 hr, 50% RH	ASTM D570	0.60 %
Shrinkage rate	Flow : 24hr	ISO 294-4	1.0 - 3.0 %
Shrinkage rate	Shrinkage rate	Across FlowFlow : 24hr	ASTM D955	1.0 - 3.0 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top

PA66 LNP™ LUBRICOMP™ RL-4530 SABIC INNOVATIVE US

Material Description

Technical Data Sheet Compare

Technical Data Sheet